• Home
• Marine Air Conditioning Pumps
• AMPCO KC Series Marine AC Pumps

AMPCO KC Series Marine AC Pumps

The AMPCO KC SERIES HIGH GRADE NAVAL BRONZE (Nickel Aluminum Bronze) pumps are an extremely durable centrifugal pump with the following features:

• RESISTS CORROSION, ELECTROLYSIS, & CAVITATION DAMAGE
• UP TO 3,300 GPH
• UP TO 158,000 BTU
• 1 x ¾" & 1¼" x 1" Port Size (FPT)

Ampco's KC Series pumps come standard with 115 or 230 VAC 50/60Hz ODP (Open Drip-Proof) Motors. Additional models are available in 3 phase, 50/60Hz, TEFC (Totally Enclosed, Fan-Cooled), IEEE-45 and other custom configurations. Larger capacity models are also available. For custom configurations please contact us directly.

What does "VAC" mean and/or stand for?
When you see "115 VAC" or "230 VAC, it is referring to the voltage of alternating current (AC) electricity. This means 115 VAC stands for 115 Volt AC Power, etc.

What is an "ODP" Motor?

An Open Drip-Proof (ODP) motor is a type of electric motor designed with an enclosure (openings in its frame) that allows air to pass freely through the motor for cooling. These openings are designed to prevent liquid or solid particles, like dust or debris, from entering the motor at angles greater than 15 degrees vertical. Here are some key points about ODP motors:

• Ventilation: The open structure allows for effective cooling, making them efficient in terms of airflow and temperature regulation.

• Protection: The drip-proof feature ensures that water falling vertically or at slight angle won't enter and damage the motor, making it suitable for relatively clean and dry environments.

• Applications: ODP motors are commonly used in indoor settings or environments where the exposure to dirt, dust, and moisture is minimal

They're a popular choice for various industrial and commercial applications due to their cost-effectiveness and efficient cooling properties. If you need a motor for a clean, controlled environment, an ODP motor might be a good fit.

*This type of motor would not be suitable for outdoor use or environments with heavy dust, moisture, or corrosive substances.

What is a "TEFC" Motor?

A Totally Enclosed Fan-Cooled (TEFC) motor is a highly durable type of electric motor (popular choice for demanding applications) with an enclosure designed to provide enhanced protection against environmental elements while maintaining efficient cooling. Here are some important characteristics of TEFC motors:

• Totally Enclosure: The motor housing is sealed to prevent prevent dust, dirt, moisture, or other contaminants from entering, providing better protection than open motors. However it is not fully airtight, as it allows some exchange of air for heat dissipation.

• Fan-Cooled: A fan is mounted on the motor shaft, outside the enclosed housing, to cool the motor by blowing air over the external frame. This ensures the motor stays at a safe operating temperature even in harsh environments. The cooling fan is enclosed within a protective shroud to direct airflow and protect the fan blades.

• Durability / Applications: TEFC motors are ideal for outdoor or industrial applications where the motor may be exposed to dust, dirt, and moisture. They are well-suited for outdoor use and in environments with abrasive or corrosive elements.

• Advantages: Highly resistant to dirt, moisture, and weather conditions. Suitable for indoor and outdoor applications. Requires less maintenance compared to Open Drip Proof (ODP) motors.

*TEFC vs. ODP . . . TEFC motors are better protected and can handle harsher environments while ODP motors have better airflow cooling and are suitable for clean, indoor applications.

What is an "IEEE-45" Motor?
The term IEEE-45 refers to an electric marine-duty motor that complies with the IEEE-45 Standard, which is a specification established by the Institute of Electrical and Electronic Engineers (IEEE). This standard provides guidelines for the electrical installations and equipment used in ships and marine environments. These motors are designed to operate in harsh marine environments, such as ships or offshore platforms, where they are exposed to moisture, salt, and other corrosive elements.

Key features of IEEE-45 motors include:

• Corrosion-Resistant Construction: They are built with materials and coatings that resist rust and corrosion.

• Totally Enclosed Design: This helps protect the motor from water and other environmental contaminants.

• Environment-Resistant Design: Enhanced protection against salt, water ingress, and vibrations compared to standard motors.

• High Torque Ratings: These motors are designed to provide strong performance even in demanding conditions.

• Specialized Insulation: They use high-quality insulation to withstand the challenging marine environment

PLEASE NOTE:
WE ARE CURRENTLY WORKING ON GETTING ALL UNITS AVAILABLE FOR ONLINE VIEWING AND ORDERING. IF YOU DO NOT SEE YOUR DESIRED BRAND/ITEM PLEASE CONTACT US DIRECTLY FOR AVAILABILITY AND PURCHASE.