Product Description
JABSCO PUPPY/KING Series Ballast Pump (12VDC)
Uses: Marine Ballast Control
Model: Puppy / King
FEATURES:
- UP to 90 GPM
- Max Flow = 15 Gal/min at 1FT
- Bronze Housing - Flexible Impeller
- Inlet: 1/2" FPT
- Outlet: 1" Barb
Jabsco offers the Ballast Puppy series and Ballast King series for wake-boards, ski-boats and jet-ski. Both are built with dry run shutoff, will not air lock, and self-prime to 4'.
The Puppy series handles 9 GPM allowing 72lbs a minute weight management, the King series handles 15 GPM for 125lbs weight. The Ballast Superking series is also available as a special order; this unit is 1-1/4" (32mm) port usually seen in European equipment.
MOTOR INFORMATION:
DC Standard Motor
12VDC
Puppy Fuse : 20A
King Fuse : 25A
SuperKing Fuse : 25A
Note: Minimum Wire Size 12 AWG
_______________________
MATERIALS:
Wet End:
Bronze (Front Housing), Stainless Steel (Shaft), EPDM (O-Ring), Neoprene (Impeller)
Uses: Open Air
Note: Requires FLOODED installation. (Pump sensor will not allow pump to run without water present)
_______________________
JABSCO OEM PART NUMBERS:
- JABSCO p/n: 18820-1127 pump description is Puppy pump 12V, 9 GPM, Switch Included
- JABSCO p/n: 18820-5127 pump description is Puppy pump 12V, 9 GPM, 25mm port, NO Switch
- JABSCO p/n: 22610-9007 pump description is King pump 12V, 15 GPM, NO Switch
- JABSCO p/n: 22610-9507 pump description is King pump 12V, 15 GPM, Switch Included
- JABSCO p/n: 22610-9007 pump description is King pump 12V, 15 GPM, 25mm port, NO Switch
- JABSCO p/n: 33610-0107 pump description is SuperKing 12V, 25 GPM, 32mm port, NO Switch
- JABSCO p/n: 6303-0007-P/24 part description is Pump Impeller Kit (Puppy Series)
- JABSCO p/n: 23095-0007-P/24 part description is Pump Impeller Kit (King Series)
- JABSCO p/n: 6303-0007-P/24 part description is also used for the SuperKing Series, But needs 2 impellers.
- JABSCO p/n: 29295-1000 part description is Non-return valve 1"/25mm for Puppy Series
- JABSCO p/n: 29295-1010 part description is Non-return valve 1-1/2"/38mm for Puppy Series
- JABSCO p/n: 29295-1000 part description is Non-return valve 1"/25mm for King Series
- JABSCO p/n: 29295-1010 part description is Non-return valve 1-1/2"/38mm for King Series
- JABSCO p/n: 29295-1000 part description is Non-return valve 1"/25mm for SuperKing Series
- JABSCO p/n: 29295-1010 part description is Non-return valve 1-1/2"/38mm for SuperKing Series
- JABSCO p/n: 18753-0095 part description is Reversal switch for Puppy and King Series
- SuperKing Series does NOT have a reversal switch
CROSS-REFERENCE MODEL(S) LIST:
JABSCO Model: 22610-9507 CAN Replace Johnson Model: 10-24690-18 (Ports are identical, Jabsco is slightly higher flow but same Ports, Voltage and Fuse)
_______________________
JABSCO PUPPY / KING SERIES BALLAST PUMP DRAWINGS, CURVES, MANUAL & GENERAL INSTALLATION INFO
(PDF VIEW AND/OR DOWNLOAD)
- JABSCO PUPPY BALLAST FLYER (View and/or Download)
- JABSCO KING / SUPERKING BALLAST FLYER (View and/or Download)
- JABSCO PUPPY BALLAST PUMPS DRAWING (View and/or Download)
- JABSCO KING BALLAST PUMPS DRAWING (View and/or Download)
- JABSCO PUPPY BALLAST PUMPS MANUAL (View and/or Download)
- JABSCO KING BALLAST PUMPS MANUAL (View and/or Download)
- JABSCO BALLAST PUMPS CATALOGUE / PARTS LIST (View and/or Download)
_______________________
