Product Description
MARCH SUBMERSIBLE SEAL-LESS CENTRIFUGAL MAGNETIC DRIVE PUMP (115V 50/60Hz or 230V 50/60Hz)
Uses: Marine Air Conditioning and Fountains
Model: LC-5C-MD
FEATURES:
- UP to 870 GPH
- Max Flow = 14.5 Gal/min at 1FT
- Max Head = 27FT (11.7psi)
- Up to 48,000 BTU
- Epoxy Encapsulated Motor
- 115V or 230V 50/60hz Options
- Inlet: 1"FPT
- Outlet: 1/2"MPT
- Can use Submerged or not submerged
The March Model LC-5C-MD is an American submersible seal-less centrifugal magnetic drive pump and is standard equipment on a majority of smaller systems up to 48,000 BTU. The magnetic drive design eliminates the conventional seal found in most pumps, reducing the chance for leaks. The epoxy encapsulated motor allows the pump to be fully submerged; you can also choose to use not submerged. It is capable of generating a maximum flow of 15 Gallons per minute at 2 foot, and its maximum head is 27 Foot (11psi). It is available in 115 or 230 VAC 50/60 Hz. The standard pump wet end (the materials that come into contact with the solution) is composed of Polypropylene (Front and Rear Housing, Impeller), Cupric Nickel (Cooling Tube), Buna N (O-Ring, Cooling Tube Seal), Ceramic (Shaft, Thrust Washer), Ceramic Magnet. Pump head (wet end) kits are available and easy to replace with only a screwdriver (please contact us if kits are needed)
The standard motor is a 1 Phase 115V or 230V 0.125 Horsepower motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The pump can tolerate a maximum internal pressure of 25psi, and a maximum liquid temperature of 130 Fahrenheit or 54 Celsius. The March LC-5C-MD centrifugal magnetic drive pump is capable of handling fresh water, salt water, and mild chemicals. If unsure of being suitable for your specific application, or any other questions before placing your order, please contact us for further assistance.
MOTOR INFORMATION:
115V Motor
6 Foot Cord, Submersible
60Hz: 1Ph 0.125HP/0.093kW, 1.6 AMPS, 3450RPM
50Hz: 1Ph 0.125HP/0.093kW, 1.2 AMPS, 2850RPM
230V Motor
6 Foot Cord, Submersible
60Hz: 1Ph 0.125HP/0.093kW, 0.9 AMPS, 3450RPM
50Hz: 1Ph 0.125HP/0.093kW, 0.5 AMPS, 2850RPM
_______________________
60Hz Performance:
Max Flow = 14.5 US GPM (54.9 LPM)
Max Head = 27 FT (8.2 M)
Power = 0.125 HP (0.093kW)
50Hz Performance:
Max Flow = 14.5 US GPM (54.8 LPM)
Max Head = 19.6 FT (6 M)
Power = 0.125 HP (0.093kW)
_______________________
Wet End:
Polypropylene (Front and Rear Housing, Impeller), Buna N (O-Ring, Cooling Tube Seal), 316 Stainless Steel (Cooling Tube), Ceramic (Shaft, Thrust Washers), Ceramic Magnet
Uses:
SUBMERSIBLE or OPEN AIR
Note: When submerged, Epoxy, Noryl and Cord is also in contact with the solution
Max Internal Pressure: 25 PSI (1.7 bar)
Max Internal Temperature: 130 °F (54 °C)
_______________________
MARCH OEM PART NUMBERS:
- March p/n: 0150-0004-0500 pump description is #LC-5C-MD 115V
- March p/n: 0150-0004-0600 pump description is #LC-5C-MD 230V
- March p/n: 0150-0004-0530 pump description is #LC-5C-MD 115V W/Carbon Bushing
- March p/n: 0150-0004-0630 pump description is #LC-5C-MD 230V W/Carbon Bushing
CROSS-REFERENCE MODEL(S) LIST:
Replaces Marine AIR: PML1000
Replaces Marine AIR: PML1000C (230V Variant Required)
_______________________
MARCH PUMP DRAWINGS, CURVES, MANUAL & GENERAL INSTALLATION INFO
(PDF VIEW AND/OR DOWNLOAD)
- MARCH LC-5C-MD (115V) DIMENSIONAL DRAWING(View and/or Download)
- MARCH LC-5C-MD (230V) DIMENSIONAL DRAWING (View and/or Download)
- MARCH LC-5C-MD CURVE (View and/or Download)
- MARCH LC-5C-MD PUMP MANUAL (View and/or Download)
- MARCH PUMP GENERAL INSTALLATION GUIDE (View and/or Download)
- MARCH SAFETY INSTRUCTIONS & PREVENTIVE MAINTENANCE GUIDE (View and/or Download)
_______________________
OTHER CHEMICAL PUMPING OPTIONS - SPECIAL MODIFICATION MAY BE REQUIRED
This pump may have to be modified to pump specific gravity, viscosity, or elevated temperatures different then ambient water. The March LC-5C-MD centrifugal magnetic drive pump is capable of handling fresh water, salt water, and mild chemicals. Please refer the the March Pumps Chemical Resistance Guide for further reference . .
