Product Description
#JPR-YM08IH JMP Marine Yanmar Replacement Raw Water Engine Cooling Pump
Includes:
- JMP Yanmar Replacement Engine Cooling Pump #JPR-YM08IH
QTY: 1 - Steel Pulley & Mounting Bracket
What is the internal difference between JPR-YM08IH and model JPR-YM08IH2?
The difference is the thickness of the machined "Cam" which is incorporated or part of the Body / Casing itself. The machined thickness of YM08IH is greater (4mm) vs a smaller thickness (2mm) found in the JPR-YM08IH2, so the JPR-YM08IH model will give a higher flow rate vs JPR-YM08IH2. This is why it is very important to order the correct pump for your model of engine by referring to the cross-reference information provided.
- Note:
You can also use JPR-YM08IH for replacement of Yanmar 121575-42000 (replaced by 721575-42702), which is the pump with the NPT threaded nipple port design, but you MUST make sure that you have the rubber hose for inlet and outlet for the JPR-YM08IH hose connections. - Yanmar pump p/n 128990-42500 was replaced by p/n 128990-42510 (Johnson 10-13492-01). The difference is that the original pump 128990-42500 has 17mm Pipe inlet and outlet and 128990-42510 has Pipe inlet (17mm) and pipe outlet (19.5mm). As long as you have the inlet and outlet hose connection setup to accommodate 17mm inlet and outlet then pump JPR-YM08IH will work for you.
How to Install Mounting Bracket on Pump?
The mounting bracket does not come pre-installed on the pump; if you are using this bracket for your application you can find the step by step installation instructions by going the the Blog Page Post "How to Install Mounting Bracket on JMP Marine Yanmar Replacement Engine Cooling Pumps JPR-YM08IH & JPR-YM08IH2" . . . CLICK HERE
Product Information:
| SPECIFICATION | JPR-YM08IH |
| Port Size (Inside Diameter) |
1/2" HOSE |
| Port Size (Outside Diameter) | Approx 3/4" HOSE |
| Uses JMP Impeller p/n |
7050-01 (search 7050-01K) |
| Pump Size (LxWxH,mm) | 91 x 114 x 76 |
| Pump Weight (approx) | 4.0 lbs (1.82 kgs) |
| Replaces Genuine Yanmar Pump p/n(s) | Yanmar 128397-42500, 128990-42500 |
| Engine Model(s): |
2GMF, 3GMF, 2YM, 3YM |
| Replaces Johnson Pump p/n(s) |
Johnson 10-24509-01, 10-13337-01, F4B-903 |
| Parts Internally Compatible to Genuine | NO (Internal Changes made for better performance & Reliability) |
| Changes Made to Pump | Mechanical Seal, Ball Bearing, Shaft, Machined Steel Pulley (Washer & Nut Included) |
| Major Service Kit (All Internal Parts) *Sold Separately |
JSK0082 (For JPR-YM08IH Only) |
| Minor Service Kit *Sold Separately |
JSM0091 (For JPR-YM08IH Only) |
Features:
- Plug & Play Replacement
- Simple & Compact Design (Less Parts)
- Strong Bronze Body (Heavy Duty Marine Grade Casting)
- High Performance and Long Life Flexible Impellers
- Marine Grade Shaft (Non-Magnetic)
- Mechanical Seal instead of Lip Seal
- Heavy Duty Machined Steel Pulley
- Cam-Less Design / Cam is machined in the Body Casing.
JMP MARINE . . . "THE ONLY ONE"
Please note that shipping cost calculations are based on packaged shipping weight which can be higher than the actual product weight.
SHIPPING COST SAVINGS - BULK ORDERS:
Possible discounts on total shipping costs for multiple unit orders; please contact sales department at sales@bigblueoceanmarine.com or by phone at 1 (250) 713-1018 for bulk order shipping quotes. Bulk orders are usually based on an order of 3 units or more.
